Fingerprint Cabinet Lock, Smart Biometric Hidden Drawer Lock, Child-Safe Electric Furniture Lock

Product Description: How to Install (Please record the fingerprint before installing) 1. Fix Part A in the proper place with two large silver screws (cabinet side / upper edge, upper edge of drawer). 2. Drill a 15 mm diameter round hole in the proper position on the outside board of the drawer/cabinet and then put the fingerprint panel in the hole. Note: Put the prompt lamp on the upside. 3. At the other end of the board, pass the wire through the metal gasket and use two small yellow screws to fix the gasket and the fingerprint panel. Then connect the line to the lock box correctly. 4. Use two big silver screws to secure the lock box in place (screw length is freely chosen according to board thickness). 5. Here we're done! Check whether the distance is appropriate and whether it can lock normally.

Why Choose SUMNEW Lock? 0.5s Quick Unlock & Auto Pop-up Leading fingerprint tech, unlock only needs 0.5 S reaction time. And the latch will pop up automatically after unlocking to prevent you from forgetting to lock.

Smart AI Record up to 40 fingerprints. The fingerprints recorded are the only keys! No need for any extra cards, keys, app, or Bluetooth connection.

Support Emergency Charge Humanized design! Support USB cable emergency charge, so you don't need to worry about low power preventing unlocking.

SUMNEW TECH SUMNEW Fingerprint Cabinet Lock= Reliable Factory + Fastest Transportation + Perfect Quality + Considerate Service

Fingerprints Enroll Instruction: Step 1: Long press the sensor for about 10 seconds until the blue light turns on. Now it is in enroll mode, let's begin: Use the same finger to enroll 5 times at different angles. Then the green light will turn on, indicating that the first fingerprint was successfully recorded. Step 2: Then the blue light turns on again. It's still in enrolling mode. If you need to record more fingerprints, just repeat the second step. (5 seconds of no operation will automatically quit the enroll status)

Note: When you receive the lock, it is brand new and any fingerprint can open it! Remember to enroll your fingerprints before use! To ensure the lock works well, it's better to enroll no less than 3 different fingerprints.

Package includes: ✔ Lock Body ✔ Lock Catch ✔ Fingerprint Panel ✔ Screws & Accessories ✔ User Manual ✖ Battery ✖ Charging Cable

Humanized Electricity Tips When the battery power is low, the lock will flicker a red light. Then you can replace the AAA batteries in time. (Attention: our lock does not include Batteries and Charging Cable)

Delete Fingerprints and Restore Factory Settings: Long press the set switch, the blue light will turn on, and the red light will turn on after three seconds. Release the switch. All fingerprints were removed successfully.

Fingerprint Cabinet Lock for Home FAQs and Solutions Question 1: Why could all fingerprints unlock it? Answer: Because the lock is still in its original state, and you haven't enrolled any fingerprint in it. So, any fingerprint can open it. Solution: Enroll your personal fingerprints correctly by following the instructions/videos.

Question 2: Why is fingerprint identification slow? Answer: Because the fingerprint hasn't been recorded clearly and completely, it may cause slow identification. Solution: Re-enroll with the same finger at different angles.

Question 3: How to unlock when it's out of battery? Answer: Don't worry, there's still a plan B. The lock will have a red light flicker to remind you that it's time to change the new battery. Solution: Use your power bank to power it and unlock!

product information: